Vibrador de aplicación para montar, juguetes de adultos del estimulador de clítoris innovadores de Winyi, aplicación WY0687

los Vibrato de aplicación que se puede montarr is made of  velvety soft liquid silicone and flowing shape fits the vagina, clitoris and anus perfectly.

presupuesto	trabizo
Peso del producto	Net weight ≈ 155g
Dimensión del producto	≈ 186*161*52mm
Tiempo de descarga	≥ 40 mins
tiempo de carga	≤ 150 minutos
Operating Voltage	3.7-4.2V
Operating Current	200-300mA
Corriente de apagado	5μA
Voltaje de carga	5V
Corriente de carga	210mA
clasificacion impermeable	PIX7
prueba de ruido	≤ 50dB a 30cm de distancia
Modelo de batería	602030
Capacidad de la batería	300mAh
Charging Cable	USB2.0 TO DC2.5 OD2.5 L=80CM, pin length 13MM, white PVC
certificaciones	■MSDS ■ROHS □FDA □CE □FCC ■38.3

los Masajeador de cojines para montar Está diseñado para todos los tipos de cuerpo y niveles de experiencia.
El vibrador de cojín de ride es impermeable, por lo que se puede llevar a la bañera para una experiencia increíble y acuosa.

This APP Wearing Female Sex Toys included remote can be used to make adjustments during the ride without moving, or a partner can use the remote to control the sensations for exciting stimulation.
Es no insertivo y manos libres, perfecto para aquellos que buscan una nueva forma de orgasmo o una alternativa a los juguetes sexuales tradicionales.

Vibrador montable con aplicación principal de funciones

This product features IPX7 waterproof rating for full-body washing, full liquid silicone wrapping for a skin-friendly and soft touch, and built-in steel wire support for a soft exterior and sturdy interior for an enhanced experience.

User Manual

1. Press and hold power button for 1.5 seconds to turn on. Device vibrates for 0.2 seconds before entering standby mode. Power indicator shows steady white light. If no app/remote connection is detected during standby, device will shut down automatically after 5 minutes.
2. In standby mode, tapping on the power button enters first vibration frequency. Each tap cycles through frequencies, with a single light flash indicating change. Cycles through 9 frequencies in order.
3. While powered on, press and hold the power button for 1.5 seconds until light turns off to power down.
4. While charging, white light flashes. When fully charged, light becomes steady.
5. After powering on, open the device interface in app and select “Add Device” to pair. Device vibrates once upon successful connection. Follow app version prompts on your phone screen.
6. When battery is low, here’s what you see – a rapidly flashing light until the device automatically shuts down.
7. Use 13mm charging pin to attach USB charging cable.