WY0553 HELEN-10 Vibrador de doble extremo controlado por aplicación de frecuencia
A big brand favorite, this USB-rechargeable, 1.9Hz Vibration (3 Speeds, 6 Frequency Modes), Mobile APP-controlled double-end vibrator achieves a minimum monthly sales volume of 2000 pieces.You could use U shape couple vibrator when you have a shower or swimming pool party.
| suelto | presupuesto |
| Net Weight of Main Unit | Approx. 80g |
| Dimensions of Main Unit | Approx. 85*38*32.5mm |
| Tiempo de descarga | ≥ 45 minutes |
| tiempo de carga | ≤ 120 minutes |
| Corriente de carga | 300mA |
| clasificacion impermeable | PIX7 |
| Noise Test Range | ≤ 52dB at a distance of 30cm |
| Modelo de batería | 701530 |
| Voltaje de trabajo | 3.7-4.2V |
| corriente de trabajo | 280mA |
| Corriente de apagado | ＜ 10μA |
| Voltaje de carga | 5V |
| Capacidad de la batería | 270mAh |
| Charging Cable | USB2.0 TO DC2.5, OD2.5, L=80CM, Pin Length 15MM, Black PVC |
| Certificaciones relevantes | ■ MSDS ■ ROHS ■ 38.3 |
El increíble material suave te brinda una experiencia más emocionante. Tanto los productos como el control remoto son recargables por USB.
La vibración se puede activar presionando un botón de toque en el cuerpo de Helen o usando un simple control remoto. Cualquiera de las opciones recorrerá los puntos de placer interior y exterior de Helen Sync a través de los 11 patrones de vibración que mencionamos.
Instructions for Use
- Hold down the power button for 1.5 seconds to power on. The device vibrates for 0.2 seconds before entering standby mode so the blue power indicator stays lit. If not app or remote connected during standby, the device powers itself down after 5 minutes.
- In standby, press power to access the first vibration frequency. Single press to cycle through the frequencies, with each switch followed by a single light flash. Cycles through the 9 frequencies in sequence.
- In powered on state, hold the power button down for 1.5 seconds, until light goes off, to power down.
- The blue light will flash when charging. When charged it stays lit steadily.
- After powering on, open the device interface and click “Add Device” to connect. You will feel the device vibrate once when connection is successful. Just follow the prompts on your phone screen for your app version.
- When the batteries low the light will flash rapidly until the device automatically shuts down.
- Use the 15mm charging pin to connect the USB pin. Translated with DeepL.com (free version).
revisiones
Aún no hay reseñas.