WY0553 HELEN-10 Frequency APP Controlled Double End Vibrator

A big brand favorite, this USB-rechargeable, 1.9Hz Vibration (3 Speeds, 6 Frequency Modes), Mobile APP-controlled double-end vibrator achieves a minimum monthly sales volume of 2000 pieces.You could use U shape couple vibrator when you have a shower or swimming pool party.

Amazing soft material brings you more exciting experience. Both products and remote control are USB rechargeable.

The vibration can be activated by pressing a tap button on Helen’s body, or using a simple remote control. Either option will cycle the inner and outer pleasure points of Helen Sync through the 11 vibration patterns we mentioned.

Instructions for Use

1. Hold down the power button for 1.5 seconds to power on. The device vibrates for 0.2 seconds before entering standby mode so the blue power indicator stays lit. If not app or remote connected during standby, the device powers itself down after 5 minutes.
2.  In standby, press power to access the first vibration frequency. Single press to cycle through the frequencies, with each switch followed by a single light flash. Cycles through the 9 frequencies in sequence.
3. In powered on state, hold the power button down for 1.5 seconds, until light goes off, to power down.
4. The blue light will flash when charging. When charged it stays lit steadily.
5.  After powering on, open the device interface and click “Add Device” to connect. You will feel the device vibrate once when connection is successful. Just follow the prompts on your phone screen for your app version.
6.  When the batteries low the light will flash rapidly until the device automatically shuts down.
7. Use the 15mm charging pin to connect the USB pin. Translated with DeepL.com (free version).