Clitoral Sucking Vibrators: OEM/ODM Specifications and Wholesale Sourcing Guide

A clitoral sucking vibrator, also sold as a clitoral suction stimulator or air-pulse stimulator, works differently from a standard vibrator. Instead of a motor shaking against the skin, a sealed silicone opening pulls air in and out in pulses, creating rhythmic pressure against the clitoris with little or no direct contact. That mechanical difference is also where sourcing gets tricky: three current SKUs sit in this category, WY0735, WY0575, and WY0635, and their published specs diverge enough that quoting one as a stand-in for the others will get you in trouble with a buyer.

Here’s the three compared model by model, with a flag anywhere a figure you might expect isn’t published, and a checklist for what to ask before you commit to an order.

Key Takeaways

What Makes a Clitoral Sucking Vibrator Different

Each listing describes the mechanism the same general way: a soft silicone rim seals against the body, and short presses of a single button step through suction levels or modes. None of the three product pages names the internal component driving that pressure, whether it’s a diaphragm, a small pump, or something else, and none publishes pressure or pulse-performance data. If you need that level of engineering detail for your own spec sheet, get it from your account contact rather than guessing at it.

Two of the three, WY0735 and WY0575, are suction-only. WY0635 pairs suction with a separate vibration function in the same body. Its listing doesn’t say whether the two run together or one at a time, worth confirming before you describe it as dual stimulation in your own copy.

Reading the Spec Sheet: Motor, Modes, and What the Numbers Mean

The 5-Level Clitoral Suction Stimulator WY0735, also listed as Gloria, runs on a 130 motor at a no-load speed of 4,500 rpm ±10%, with five suction levels marked 40%, 50%, 60%, 70%, and 80%. What that percentage actually measures, motor output, pressure amplitude, or a firmware power setting, isn’t stated, and no-load rpm on its own says nothing about stimulation strength against the body. Battery is a 601230-format lithium cell at 170mAh, charging by magnetic USB in roughly two hours for about an hour of runtime. It’s rated IPX5, and the listing is explicit that it shouldn’t go underwater. No certification is listed on the page.

The Custom Rechargeable Clitoral Suction Stimulator WY0575 trades the motor spec for more modes, ten suction intensity levels on one-button control, and the longest runtime of the three at up to two hours on a 250mAh cell charged over Type-C. No waterproof rating appears on its page at all, so treat it as unrated until the factory says otherwise. CE and RoHS are listed.

The Custom Rechargeable Whale Suction Stimulator WY0635 is the outlier: ten suction modes plus ten vibration modes and a burst setting, on a 500mAh cell, rated IPX6. Whether that’s 21 genuinely distinct settings or a smaller number of combined states isn’t spelled out on the page. RoHS, CE, and UN38.3 are listed, the last one relevant because of the built-in lithium cell.

WY0735, WY0575, and WY0635 Compared

Spec values are taken from each product page as written. Where a SKU doesn’t publish a given figure, the cell reads “Not published” rather than guessing from a sister SKU.

IPX5 vs IPX6: What These Waterproof Ratings Actually Cover

WY0735’s IPX5 and WY0635’s IPX6 sit on the same IEC 60529 scale, one step apart. IPX5 means it can handle a low-pressure water jet from any angle. IPX6 handles a stronger jet. Neither one covers submersion, that’s a separate IPX7 or IPX8 rating, and neither product page here publishes one. WY0735’s own listing says as much directly. WY0575 has no rating published, so don’t photograph or describe it as rinse-safe until the factory confirms it. None of the three should be marketed as submersible.

Silicone and Body-Contact Materials

All three list silicone as the body material, and WY0635’s listing goes further with “full-body wrapped food-grade silicone.” That description tells you what the material is, not that the finished part has cleared a medical-device review, and it shouldn’t be repeated to your own buyers as a regulatory claim. None of the three pages names a silicone grade, a test method, or a report number, and none lists what’s underneath the silicone, colorant, structural plastic, adhesives, button material. If a buyer needs documentation beyond “silicone,” ask for the finished-part test report tied to the exact SKU, color, and batch. The in-house testing lab runs tensile-strength and abrasion testing among other equipment, though results for these three SKUs specifically aren’t published.

Certification: CE, RoHS, and UN38.3 Explained

Work from what each product page actually states rather than assuming one certification list covers the whole catalog. WY0575 lists CE and RoHS. WY0635 lists RoHS, CE, and UN38.3. WY0735 lists none. CE marking means the manufacturer attests conformity with the applicable EU rules for that product, backed by a Declaration of Conformity, not a blanket safety stamp. RoHS restricts specific hazardous substances, certain heavy metals and flame retardants among them, in electrical and electronic equipment, it’s a substance rule, not a general safety certificate. UN38.3 is the UN standard for lithium-battery transport safety, and it applies here because all three SKUs carry a built-in lithium cell.

A broader certification and testing program covers FDA-related testing language, LFGB, BSCI, ISO 9001, CE, RoHS, UL, FCC Bluetooth certification, UL 4200A battery safety certification, and amfori audits, but none of that applies wholesale to this line: these three SKUs don’t use a button battery or Bluetooth, so UL 4200A and FCC Bluetooth shouldn’t be cited for them. On FDA specifically, the FDA doesn’t regulate this category as a medical device, so any FDA-related testing language describes testing, not approval. Before ordering, ask for the current Declaration of Conformity, the RoHS and UN38.3 reports tied to the actual battery shipping in your order, and the battery’s safety data sheet, none of these carry report numbers or dates on the public pages, so get them directly. If you’re shipping into the EU, UK, or US, confirm current marking and safety-documentation requirements with your own compliance contact, they vary by market and change over time.

Manufacturing and Quality Control

The factory behind this line positions itself as a manufacturer rather than a trading company, operating since 2014 out of a 5,000-square-meter site in Longgang District, Shenzhen. Staff counts differ depending on which page you read, the company site states 500+ personnel overall and 100 production staff specifically, so use whichever figure matches what you’re asking about. In-house capability covers concept sketching, 2D/3D modeling, mold tooling, Pantone color matching, logo application by silk-screen or laser engraving, and packaging from standard retail boxes up to gift-box tiers, run through a five-stage QC process: incoming inspection, sample validation, in-process monitoring, lab verification, and a final pre-shipment check. The lab itself runs an IPX7 tank test (1 metre depth, 30 minutes), a button key-life tester, battery and abrasion testing, salt-spray corrosion testing, and tensile-strength testing, though nothing on the public pages confirms which of those were run against WY0735, WY0575, or WY0635 specifically, so ask for SKU-level inspection records if you need them.

MOQ and Customization

Fifty pieces per SKU gets you a stock order with no changes. Add a logo, a custom color, or packaging changes and each of the three product pages puts the minimum at 1,000 pieces, while the OEM and ODM service page separately mentions select production-ready models starting custom logo runs from 100 pieces, a different number from a different page, not a blanket rule, so confirm which one applies to your SKU before you quote a buyer. Customization itself covers color, logo (silk-screen or laser engraving), packaging design, and barcode prep. Lead time is only published for WY0735, 7 business days for stock, 30 to 35 days customized, don’t assume WY0575 or WY0635 match it without asking.

Choosing Between the Three Models

If a documented waterproof rating matters and you only need suction, WY0735 is the one with a published IP rating, though it has no certification listed. If runtime is the priority and certification matters more than water resistance, WY0575 covers both at the cost of no IP rating. If the listing needs suction and vibration together, WY0635 is the only one built that way, and it’s also the most documented of the three, IPX6 plus RoHS, CE, and UN38.3.

What to Ask Before You Order

• Which MOQ applies to your SKU and customization type, the 1,000-piece figure on the product page or the 100-piece figure on the service page
• Current Declaration of Conformity, RoHS report, and UN38.3 summary tied to your actual battery, plus the SDS
• The finished-part material test report and named silicone grade for your SKU
• What the 40 to 80% suction-level figures on WY0735 measure
• Whether WY0635’s suction and vibration run together or separately
• Sample and mass-production lead time for WY0575 and WY0635 specifically
• Packaging specs for your order: unit box size, units per carton, neutral vs. retail branding
• Payment terms, sample charges, and tooling fees for your target quantity

FAQs About Clitoral Sucking Vibrators

What’s the real difference between WY0735, WY0575, and WY0635?

WY0735 and WY0575 are suction-only. WY0635 adds a separate vibration function and carries the most documentation of the three, an IPX6 rating and RoHS, CE, and UN38.3 certification.

Can I sell any of these as waterproof for full submersion?

No. IPX5 and IPX6 both cover water jets, not submersion. WY0735’s page says directly that it shouldn’t be immersed, and WY0575 has no rating published at all.

Does “food-grade silicone” mean these are FDA-approved?

No. The FDA doesn’t regulate this category as a medical device. Material language and any FDA-related testing references describe testing and material properties, not approval.

What MOQ should I quote?

50 pieces for stock. For customization, the product pages say 1,000 pieces, while the service page separately mentions select models from 100. Confirm which applies to your SKU before you quote a buyer.

Get a Quote for WY0735, WY0575, or WY0635

Share your target SKU, order quantity, target market, branding or logo needs, packaging preference, and which certification documents you need. WINYI can confirm the current MOQ, pull the compliance documentation for your specific SKU, and quote a sample and production lead time.

Request a Quote for WY0735 / WY0575 / WY0635