Betty 10-Mode Electric Shock Vibrator WY0727 – Custom Rechargeable

The pair is shot on one unit with one lighting setup, so nothing about the shape changes between the two frames. The IPX5 seal covers the full body, not just the head – that is the difference between a toy your customer cleans in ten seconds and one they stop using. The silicone is molded over a rigid ABS core, so the surface stays soft while the shell keeps its shape under hand pressure.

Buyers tend to ask two things about this section: how it cleans and how long it lasts. The sealed body answers the first, and the battery ageing test on every batch answers the second. Private-label runs start around 500 pieces with your logo printed on the handle.

The drawing below is the one our tooling team works from, so the numbers are the numbers that ship. The paired frame is the matching studio angle. Dimension call-outs run 147.0, 90.0 and 56.0 mm, which is what your packaging supplier needs to cut an insert that actually holds the unit.

Samples of this model go out in about 3-7 days for stock colors, and the sample fee is credited back against the bulk order. That keeps a first test cheap enough to run alongside a range review rather than on its own.

The same unit photographed from two sides at catalog scale, so the proportions can be judged before a sample is ordered. Waterproof is shown rather than claimed: the housing is sealed to IPX5, so a rinse under the tap never reaches the motor bay. Silicone also takes pigment cleanly, which is why custom Pantone colors hold on this shell but drift on TPE.

If the model is going into a retail chain rather than an online store, we can supply the same unit in a printed giftbox with a die-cut insert and a multilingual manual card. That version adds roughly 5-10 days to the lead time.

The annotated view breaks the discreet bullet toy into its working parts, with the labels sitting where the parts actually are. The paired frame goes in on the charging contact. The 10 settings step through one button, from a light flutter to the strongest continuous gear, with no app or remote in the loop. Magnetic charging removes the usual weak point on a waterproof toy – the rubber flap – and makes the connection one-handed.

For OEM buyers, the shell color, the logo print and the box artwork are three separate choices – each can be changed without touching the mold, which keeps a rebrand from turning into a tooling project.

The line-art scene shows how the discreet bullet toy sits in use – held in one hand, low against the body, control under the thumb. The paired frame is a macro of the finish. With the shell rated IPX5, cleaning is a tap rinse instead of a careful wipe, and the same gasket keeps water away from the charging contact. Body-contact surfaces are soft silicone: non-porous, phthalate-free, and free of the seam lines you get from cheaper TPE molds.

Worth noting for the spec sheet: the numbers in this frame come from the mold, and the same drawing is what our tooling team cuts inserts from – so a packaging supplier can start before the first sample lands.

The retail box is opened out flat so you can see exactly what a customer receives. The retail box is laid out flat here: the unit, the charging cable and the manual card, with room left for a branded sleeve.

On the production side, every unit on this page comes off the same four-step QC line – visual check, power-on, function test, charging test – plus a 30-cycle battery ageing run on each batch. Stock colors ship in 3-7 days; custom color and printed packaging add about 5-10 days.

On the right: the WY0564 vibrator from the same WINYI line – open it for its full specifications, or browse the vibrators category to compare more models.