Custom Rechargeable Abby 20-Mode Bullet Vibrator WY0726

Studio frames at true scale: the depth and taper read the same here as they will on your own listing. With the shell rated IPX7, cleaning is a tap rinse instead of a careful wipe, and the same gasket keeps water away from the charging contact. Silicone also takes pigment cleanly, which is why custom Pantone colors hold on this shell but drift on TPE.

For OEM buyers, the shell color, the logo print and the box artwork are three separate choices – each can be changed without touching the mold, which keeps a rebrand from turning into a tooling project.

This sheet is what turns a photo into a purchase decision: a buyer can size a box, a display, and a mailer from it. The paired frame is a macro of the finish. Dimension call-outs run 147.0, 94 and 19 mm, which is what your packaging supplier needs to cut an insert that actually holds the unit.

Worth noting for the spec sheet: the numbers in this frame come from the mold, and the same drawing is what our tooling team cuts inserts from – so a packaging supplier can start before the first sample lands.

Two angles of one unit, nothing retouched – the profile you see is the profile that ships. Waterproof is shown rather than claimed: the housing is sealed to IPX7, so a rinse under the tap never reaches the motor bay. Body-contact surfaces are soft silicone: non-porous, phthalate-free, and free of the seam lines you get from cheaper TPE molds.

If the model is going into a retail chain rather than an online store, we can supply the same unit in a printed giftbox with a die-cut insert and a multilingual manual card. That version adds roughly 5-10 days to the lead time.

Every label on this graphic maps to a line in the spec table below, which is why the two are worth reading together. The paired frame goes in on the charging contact. Charging is over USB, so the same cable that tops up a phone works for the toy – no dedicated dock to ship or replace.

Samples of this model go out in about 3-7 days for stock colors, and the sample fee is credited back against the bulk order. That keeps a first test cheap enough to run alongside a range review rather than on its own.

The scene strip sketches the practical side: where the unit goes, how it is held, and what the user does next. The paired frame is a macro of the finish. The IPX7 seal covers the full body, not just the head – that is the difference between a toy your customer cleans in ten seconds and one they stop using. The silicone is molded over a rigid ABS core, so the surface stays soft while the shell keeps its shape under hand pressure.

On the production side, every unit on this page comes off the same four-step QC line – visual check, power-on, function test, charging test – plus a 30-cycle battery ageing run on each batch. Stock colors ship in 3-7 days; custom color and printed packaging add about 5-10 days.

The cleaning step is shown rather than described, which is the part of a listing that answers the most pre-sale questions. The paired frame opens the retail box. With the shell rated IPX7, cleaning is a tap rinse instead of a careful wipe, and the same gasket keeps water away from the charging contact. The retail box is laid out flat here: the unit, the charging cable and the manual card, with room left for a branded sleeve.

For your listing, the useful part is that these claims are checkable: each one maps to a line in the specification table below and to the CE file we send with samples. MOQ starts at about 5 pieces per item, so a market test does not need a container.